|
|
Build Your Online Product Catalogs?
| Product Name: |
30A Solar Lighting Controller CM30
|
| Supply Ability: |
|
| Related proudcts |
solar panel, solar controller, solar charge control, |
| Specifications |
CM30 controller is a kind of intelligent, multi-purpose solar ch |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
1 piece |
| Unit Price: |
|
|
The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements. CM30 controller has following features:
>>Image of LCD graphic symbol
>>Simple button operation
>>Automatic Identification System Voltage level
>>Intelligent PWM charge mode
>>Automatic Temperature Compensation
>>Adjustable charge-discharge control parameters
>>Settable Operating mode of Load
>>Overload, Short Circuit Protection
>>Remote monitoring and control function (custom)
>>Battery reverse-discharge protection
>>Battery Low Voltage Disconnection (LVD)
>>Battery reverse connection protection
>>Accumulated function of charge and discharge Ampere hours
Installation
1. Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop. Check weather the installation sitescompliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.
2. Install the controller into a fixed vertical plane. See section 5 of the pore size and pore ***cing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller ***ce.
3. As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.
4. Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar ***ce with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)
5.If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to The host computer.
Demolition: To prevent acc |
| Company: |
YSmart Technology Co.,Ltd
|
| Contact: |
Mr. robin lin |
| Address: |
No. 30 XinFeng Road,Potoubei Village,Ailian Town,Longgang Dist,Shenzhen |
| Postcode: |
518172 |
| Tel: |
8675585232255 |
| Fax: |
8675585232255 |
| E-mail: |
|
|
|
|
Home
