|
|
Build Your Online Product Catalogs?
| Product Name: |
10A Solar Lighting Controller 10I ST
|
| Supply Ability: |
|
| Related proudcts |
solar pannel, solar controller, solar charge control, |
| Specifications |
3 Control modes to choose: 1.Charge Only 2.Light Control 3.Li |
| Price Term: |
|
| Port of loading: |
shenzhen |
| Minimum Order |
|
| Unit Price: |
|
|
For 10A 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 10A 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
Package including:
1.1PCS 10A Solar Contorller
2.1PCS User Manual
Protection:
Overcharging protection
Can be used for all panels
Overdischarging protection
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments
Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge
Features:
â—†Microcontroller digital accuracy
â—†PWM charge mode & State of Charge(SOC)
â—†Fully automatic operation & Electronic protections
â—†Detects day and night using the PV array, timer setting
â—†Double digital LED display, numbers equal to timer setting
â—†Temperature compensation, with inside temperature sensor
â—†Big terminals, big distance between terminals
Rating:
10I: 12 Volt or 12/24 Volt auto work, 10 Amps (for PV and load)
Equalisation voltage: 14.8Volt
High voltage disconnect(HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect(LVD) 11.1Volt
Low voltage reconnect(LVR): 12.6Volt
Self-consumption: 6mA maximum
Temperature compensation: -30mV/â„?12V
Terminals: for wire sizes to 6mm2
Temperature: -35â„?to +55â„?
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Time |
| Company: |
YSmart Technology Co.,Ltd
|
| Contact: |
Mr. robin lin |
| Address: |
No. 30 XinFeng Road,Potoubei Village,Ailian Town,Longgang Dist,Shenzhen |
| Postcode: |
518172 |
| Tel: |
8675585232255 |
| Fax: |
8675585232255 |
| E-mail: |
|
|
|
|
Home
